Selection environment and environmental sensitivity in barley

Summary Groups of 10 barley genotypes were selected for high grain yield under either high yielding (two groups) or low yielding conditions (two groups). The genotypes had a similar average grain yield across a wide range of yielding conditions, but differed in their linear response over environments (environmental sensitivity). The genotypes selected for high grain yield under low yielding conditions were less sensitive to changing environments than genotypes selected for high grain yield under high yielding conditions. The higher stability of genotypes selected under low yielding conditions was shown by both the linear regression analysis and the comparison of coefficients of variation. The use of a safety-first index showed that the probability of a crop failure of genotypes selected for high grain yield under high yielding conditions was between 1.8 and 2.7 times higher than for genotypes selected for high grain yield under low yielding conditions. The development of new cultivars for areas where a large proportion of the crop is grown by subsistence farmers should therefore be based on selection under low yielding conditions.     

Stability of 1000-grain weight and its relation with other traits of barley in dry areas

Summary The effects of 1000-grain weight, its stability and the correlation coefficients with other traits of 50 barley varieties were studied at 18–20 environments. Additional material was used to study genotypic correlations among traits. Significant differences in stability of 1000-grain weight were found among varieties. Two-row varieties were on average more stable than 6-row varieties. The 1000-grain weight was among the most stable and grain yield the most variable traits. This was discussed in connection with stem reserves translocation to the grain. Consistently high yielding varieties had around average stability of 1000-grain weight. Regression coefficient, b, for 1000-grain weight was positively correlated with variance of log transformed data, both valid estimates for stability of 1000-grain weight. The correlation coefficient of 1000-grain weight with grain yield was positive or non-significant, with number of grains per tiller mainly negative and with volume weight it was positive. In 6-row barley, 1000-grain weight was positively correlated with grain yield, straw yield, total biological yield, and plant height, and negatively with number of tillers per m² and number of grains per tiller.     

A simple procedure for yield component analysis

Summary This paper introduces a simple method of analysing yield components. It allows quantification of the contribution of each component to the variability of final yield. The method is based on log-transforms of measurements of the component traits. Applications in heterosis breeding and stability analysis are discussed. The method is compared to other procedures of yield component analysis.     

长江江苏段岸线及岸线资源综合评

通过长江江苏段河道的演变，评价了江苏长江岸线的确定性及岸线资源条件,分析了长江江苏段岸线资源开发利用现状及存在问题，提出了岸线利用原则。在长江江苏段岸线利用过程中，还存在河势不稳定，布局不合理，重大岸线开发工程缺乏足够的科学论证和水污染严重等问题，提出遵照河道演变规律开发岸线，保护河岸工程的安全，制定权威的岸线功能区划和开发利用规划，实行岸线有偿使用。根据河岸水质污染与河床特点合理布置引水口和排污口，提高引水质量。     

土质边坡稳定安全系数影响因素的

土质边坡稳定安全系数的计算值主要与采用的简化计算方法和土工参数有关。采用正交试验法计算分析了不同的计算方法、材料参数、水位及其相关荷载、地震作用等对边坡安全系数计算值的影响，进而对设计中的计算方法和材料参数提出了一些有益的建议，并提出了在工程运行管理中应尽量避免低水位或水位骤降情况的意见，为土石坝类工程的设计与运行管理提供了重要参考。     

饲用α-半乳糖苷酶酶活稳定性的研究

在酶制剂生产加工和储存过程中,酶活稳定性是酶应用过程中最常遇到的实际问题。本文研究不同载体、高温高湿、金属离子、保存初始pH值、保护剂浓度和存储时间对体外α-半乳糖苷酶稳定性的影响。试验结果表明:①无机载体碳酸钙、元明粉和滑石粉对α-半乳糖苷酶活性影响很大,收率均为0%;有机载体中玉米皮粉效果最好,收率高达90.83%;其次是淀粉,收率为61.11%;稻壳粉收率最低,仅为44.72%。②湿度为17%,温度小于85℃,酶活损失率小于10%,说明该酶有较强的耐温能力,温度为90℃,酶活损失率达到16.2%,随着温度上升,酶活损失率开始增加,不利于酶活的保存。③Cu2+对该酶有抑制作用3,7℃恒温水浴4 h后酶活存留率仅为74%,Mn2+、Zn2+、Ca2+、Na+、K+和Mg2+对α-半乳糖苷酶有几近相同的保护作用,酶活存留率均大于92%。④该酶最适保存pH值为5.3;pH值为4.4时,酶活损失率达到30.1%,不利于酶的保存;pH值为5.6时,酶活损失率为3.77%,pH值在4.7~5.6之间,酶活损失率小于10%,有利于酶的保存。总之,过酸和过碱都不利于酶的保存。⑤1%NaCl、1%甘露醇、5%和7%的山梨醇都有杂菌产生,不利于酶的保存3;%~5%的NaCl酶活损失小于10%1,%和5%~7%的甘油酶活损失率小于5%,都有利于酶活保存。     

都汶高速公路岩石边坡植被恢复物种选择及评价

根据植物的环境适应性特性、功能特性、经济社会效益等准则要素,运用层次分析法,对优选中准则要素的各因子进行定性和定量分析,从而找出都汶高速公路边坡生态恢复的最佳植物种类。结果表明:栾树、美丽胡枝子、多花木蓝、草木樨、高羊茅等9种抗逆性强、护坡效果好、成本低廉的植物最适宜于都汶高速公路边坡生存生长。     

Turbiscan Lab分散稳定性分析仪研究异丙甲草胺水乳剂物理稳定性

为获得不同因素对异丙甲草胺水乳剂物理稳定性的影响规律,同时验证Turbiscan Lab分散稳定性分析仪预测和评价水乳剂物理稳定性的可行性,利用Turbiscan Lab分散稳定性分析仪,结合加速试验[(54±2)℃,14d]结果,研究了乳化剂用量、体系pH和电解质离子等对磷酸酯盐稳定的异丙甲草胺水乳剂物理稳定性的影响。结果表明:乳化剂三苯乙烯基苯酚聚氧乙烯醚磷酸酯三乙醇胺盐(SCP)用量为6.0%(质量分数)时,水乳剂稳定性最好;过酸或过碱均会破坏水乳剂的稳定性,pH=9时水乳剂可获得较好的稳定性;Mg2+压缩油水界面双电层,导致水乳剂稳定性下降,且Mg2+添加浓度越大,水乳剂越不稳定。Turbiscan Lab分散稳定性分析仪以多重光散射为技术核心,在不破坏样品的前提下,能够准确测定乳状液中浮油、沉淀和液滴粒径大小的变化情况,与加速试验结果吻合度高,不仅能够缩短试验周期,而且可以分析不稳定现象发生的机理。     

The method for designing the profile of forest roads supported by genetic algorithm

This study examines a method for designing an optimum profile of a forest road in a short matter of time. In this method, a genetic algorithm (GA) searches for points where the gradient changes and dynamic programing (DP) designs the longitudinal slope. This method can be applied to the ground heights of an actual forest road. The evaluation function of the DP assesses the total expenditure. The inverse of this function is the fitness function. Crossover and mutation are operators of an evolution simulation of a GA. They are each repeated 20 times and 420 profiles are designed and assessed, all within about 10 min. A comparison of the profile designed by the GA with that of an actual forest road shows only one section where the formation level differed substantially. Overall, both profiles seem to show a high degree of correspondence. From this result, we believe that the profile designed by the GA is best, or the one of the best. A conventional method takes about 65 h to calculate all changing points of gradients. However, by using the GA, the calculation time was reduced to about 1/389 that of the coventional method, showing that the method which uses the GA through the profile design is very useful.